|
Transformer substations
SINGLE-PHASE COMPLETE TRANSFORMER SUBSTATION
16.03.2009
Single-phase complete transformer substations with rated power 1.25; 2.5; 4 and 10 kVÀ for HV voltage 10 or 6 kV and LV voltage 0.23 kV (ÊÒÏ further on) are assigned for reception, transformation and distribution of the electrical power of single-phase AC with 50 Hz frequency.
COMPLETE TRANSFORMER SUBSTATION OF POWER TYPE
The complete transformer substations (ÊÒÏ) rating from 25 up to 250 kVA for three-phase AC power with frequency 50 Hz and voltage 6-10/0,4 kV are single-ended for outdoor installation. They are assigned to supply agricultural consumers, separate settlements or small industrial objects in regions with temporary and cold (from – 55Ñ up to + 40Ñ).
Pole substations
02.07.2009
DEAD-ENDED COMPLETE TRANSFORMER SUBSTATION
Dead-Ended Complete Transformer Substations (ÊÒÏ 1) rating 63, 100, 160, 250, 400 êV∙À, for voltage 0,4 kV (on the LV side) are assigned for reception, transformation and distribution of three-phase AC electric power with frequency 50 Hz in systems with solidly-earthed neutral on the LV side. The ÊÒÏ are assigned to supply agricultural consumers, separate settlements and small industrial objects in regions with temporary climate (from -45Ñ to +40Ñ). The ÊÒÏ 1 is mounted on a simple concrete ground 200 mm in height.
UPRATED DEAD-ENDED COMPLETE TRANSFORMER SUBSTATION
Dead-ended uprated complete transformer substations rating 25, 40, 63, 100, 250, 400 kVÀ, for voltage 6 or 10 kV (on the HV side) and 0,4 kV (on the LV side) are assigned for reception, transformation and distribution of three-phase AC electric power with frequency 50 Hz in systems with solidly earthed transformer neutral on the LV side.
THROUGH-PASS COMPLETE TRANSFORMER SUBSTATION
18.03.2009
Through-pass Complete Transformer Substations (ÊÒÏ 2) rating 63, 100, 160, 250, 400 êVÀ, for voltage 0,4 kV (on the LV side) are assigned for reception, transformation and distribution of three-phase AC electric power with frequency 50 Hz in systems with solidly-earthed neutral on the LV side. The ÊÒÏ 2 are assigned to supply agricultural consumers, separate settlements and small industrial objects in regions with temporary climate (from -45Ñ to +40Ñ). The ÊÒÏ 2 is mounted on a simple concrete ground 200 mm in height.
UPRATED COMPLETE TRANSFORMER SUBSTATION FOR URBAN POWER NETWORK
18.03.2009
Uprated Complete Transformer Substation (here and then – ÊÒÏÃÑÌ) rating from 100 to 630 kVÀ for voltage 6 or 10 kV on the HV side and 0.4 kV on the LV side, frequency 50 Hz are assigned for reception, transformation and distribution of electric power with radial (double-radial) and loop urban networks in regions with temporary climate (temperature between -45Ñ tî +40Ñ).
COMPLETE TRANSFORMER SUBSTATION FOR URBAN POWER NETWORK
18.03.2009
Complete transformer substations rating 250, 400, 630, 1000 kV∙À for voltage 6 or 10 kV on the HV side and 0.4 kV on the LV side, are assigned for reception, transformation and distribution of electric power with frequency 50 Hz in one-two radial and loop urban networks in regions with temporary climate (from -45Ñ tî +40Ñ).
BLOCK-TYPE COMPLETE TRANSFORMER SUBSTATION
18.03.2009
Single or double transformer Single or Double-row Block-Type Complete Transformer Substations with rating power up to 2500 kV•À for primary voltage 6 or 10 kV and secondary voltage 0.4 kV, frequency 50 Hz are designed for power supply of industrial objects in temporary and cold climate (–60Ñ to +40Ñ) regions.
Concrete substations
19.03.2009
COMPLETE TRANSFORMER SUBSTATION FOR INDUSTRIAL USE OUTDOOR INSTALLATION
20.03.2009
Complete Transformer Substations for outdoor installation are assigned for electric power supply in three-phase AC systems with voltage 6-10/0.4 kV and frequency 50 Hz. They are intended for electric power supply of industrial objects in temporary climate regions (from –40Ñ to +40Ñ).
COMPLETE TRANSFORMER SUBSTATION FOR INDUSTRIAL USE INDOOR INSTALLATION
19.03.2009
Complete transformer substations with power 250, 400, 630, 1000, 1600, 2500 kV•À for voltage 6,10 kV (here and then – ÊÒÏ) are assigned to receive, convert and distribute electric power of three-phase AC with frequency 50Hz. They are applied for supplying the industrial objects in temporary climate regions and can be mounted in unheated buildings.
COMPLETE TRANSFORMER SUBSTATION FOR RAILWAY POWER NETWORK
The ÊÒÏÆ type Complete Transformer Substations with rated power 25, 40, 63, 100, 160, 250, 400, 630, 1000 kV∙À are outdoor single-transformer substations, supplied by ÄÏÐ system (Two Wire-Rails) and are intended for reception of three-phase electric power with frequency 50 Hz, voltage 27.5 kV, conversion it into electric power with voltage 0.4 kV and supplying railway stations track consumers, crossroads, stopping posts, crossings, linear-track buildings in regions with temporary climate (from -40Ñ to +40Ñ).
SINGLE-PHASE COMPLETE TRANSFORMER SUBSTATION FOR RAILWAY POWER NETWORK
The ÊÒÏÆÎ Complete Transformer Substations with rated power 2.5; 4 and 10 kV∙À are single-phase single-transformer substations for outdoor installation. They are assigned for single-phase AC electric power receiving with 50 Hz frequency and voltage 27.5 kV, for transforming it into voltage 0,23 kV and for supplying railway station linear consumers, crossing points, flag (roadside) stations, crossings, line-track buildings in regions with temporary climate (from -40Ñ to +40Ñ).
COMPLETE TRANSFORMER SUBSTATIONS WITH EMERGENCY SUPPLY INPUTS
The complete double-transformer (2ÊÒÏÀ) substations with emergency supply inputs are designed for reception, conversion and distribution of three-phase AC electric power with frequency 50 Hz and are intended for the first category and special reliability group consumers’ supply (auxiliaries of gas-transfer compressor stations of gas-main pipelines). The 2ÊÒÏÀ double-transformer substations are assigned for indoor installation and can be operated in temporary climate conditions (from -20Ñ to +40Ñ).
COMPLETE TRANSFORMER SUBSTATIONS FOR SUBMERSIBLE PUMPS POWER SUPPLY
The ÊÒÏÏÍ Complete Transformer Substations for submersible pumps power supply are intended for reception and transformation of electric power, control and protection of the ÏÝÄ submersible pump electric motors rating from 16 to 125 kVA with built-in control block.
ALL-PURPOSE COMPLETE TRANSFORMER SUBSTATIONS
The all-purpose complete transformer substations with rated power 25…250 kVÀ for three-phase AC, frequency 50 Hz and voltage 6(10)/0.4 kV are single-transformer substations of single-ended type for outdoor installation. The ÊÒÏÓ are assigned for energy supply of petroleum industry consumers. The ÊÒÏÓ are designed to receive, convert and distribute electric power for oil-production industry in regions with temporary climate (frîm -45Ñ tî +40Ñ).
COMPLETE TRANSFORMER SUBSTATION FOR CONCRETE AND SOIL HEAT TREATMENT
The ÊÒÏÒÎ-80-96Ó1 Complete Transformer Substations with rated power 80 kVÀ for outdoor installation are intended for heating and other ways of electrothermal treatment of concrete and frozen soil with automatic temperature control and for power supply of manual three-phase tools and temporary lightning (voltage 36 V) on building grounds.
AUXILIARY COMPLETE TRANSFORMER SUSTATIONS
The ÊÒÏÑÍ auxiliary complete transformer substations are intended to supply auxiliaries of power stations (including nuclear power stations). Climatic type and category of installation of substations are ÓÇ and 04 according to ÃÎÑÒ 15150-69. Air temperature in power and relay cells must not to exceed 55Ñ. The ÊÒÏÑÍ can operate in seismically dangerous regions.
|
Ukraine, 29000
Khmelnitskiy V. Chornovola str, 120 tel +38 0382 788-454, fax +38 0382 65-51-92 zakaz@uea.km.ua Products catalogue
  |
© Ukrelektroapparat 2009
